Oiling the Rotary Hook on a Commercial Embroidery Machine

How do you oil the rotary hook on a commercial embroidery machine? Here is a training video that can help with almost any commercial embroidery machine that you have. Every machine does have it's own oiling procedure, however there are some basic oiling tips that work for every embroidery machine including Tajima, SWF, HAPPY, Melco and Toyota embroidery machines. Oiling is essential for every machine to function properly and to keep your machine in good condition. There are two main areas to oil on a regular basis: the rotary hook and the main reservoir. The recommendations below are based on actual production use of the machine. For instance, oiling the Rotary Hook is recommended for every 4 hours of production. That does not mean to oil the hook twice a day if you are NOT actively using the machine. Applying too much oil can cause problems.

Embroidery Training Videos for Service, Repair and Business


	Join our Embroidery Training Mailing List
	» JOIN NOW

Home

SWF

SWF Repair DVD

SWF Operation DVD

Tajima

Pulse Software

Toyota

Toyota Training Videos

Barudan

Melco

Happy

Inbro

Renaissance

Garment Printers

Software

Supplies

Screen Printing

Screen Printing

Repair Service

Embroidery Designs

Oiling your Embroidery Machine Part 2

What are some helpful tips to oiling the rotary hook on your embroidery machine?

Oiling the Rotary Hook
For every 4 hours of production, 1 drop of oil should be placed in the Rotary Hook.

1) Remove the bobbin case before oiling.
2) Place 1 drop of oil on the bottom of the Rotary Hook, see picture below:
3) After oiling the hook and with the bobbin case still removed, press the trim button once. This will spread the oil evenly on the rotary hook.
Main Reservoir
For every 8 hours of production, 2-3 drops of oil should be placed in the main reservoir.
Greasing the rail, Oiling the Rotary Hook, Error 100, Removing the pressure foot, Rotary hook preparation, Your machine upon arrival, Attaching or changing the control panel, Putting on the leveling bolts, Assembling the light fixture, Placement of the table, Assembling the thread rack, Pull through method, Centering the hoop, Hooping for front and side embroidery, LED PANEL,Intro to the Edit button, Cleaning bobbin case, Oiling the rotary hook, SWF machine training videos, SWF Repair Training

Back to Home

Oiling the rotary hook

Back to Chapter List

SWF 601C/1501/1501C/1502/1504/1204/1506
Oiling the rotary hook on your embroidery machine

SWF Machine Training
DVD

SWF Repair Training
DVD set

Learn how to use your new or used SWF embroidery machine with this comprehensive, embroidery training video Learn how to Repair and Maintain your new or used SWF embroidery machine with this comprehensive training video

$99

$139

Lots of Free Videos Samples

Lots of Free Videos Samples

Fill out the form below
(for more information or to ask a question)

Email Address:

Question:

©Revised: 2008 Service Watch Systems - All rights reserved
Greasing the rail,Oiling the Rotary Hook,Error 100,Removing the pressure foot,Rotary hook preparation,Your machine upon arrival,Attaching or changing the control panel,Putting on the leveling bolts,Assembling the light fixture,Placement of the table,Assembling the thread rack,Pull through method,Centering the hoop,Hooping for front and side embroidery,LED PANEL,Intro to the Edit button,Cleaning bobbin case,Oiling the rotary hook,SWF machine training videos,SWF Repair Training

Web	www.embroiderytrainingvideos.com